FLEETGUARD LF3524 Oil/Lube filter for MITSUBISHI Engine
The importance of clean motor oil
Clean motor oil is important because if the oil were left unfiltered for a period of time, it could become saturated with tiny, hard particles that can wear surfaces in your engine. This dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine.
KOBELCO 2451U311-1A 24514311-1A
HYUNDAI 26320-41402 KS218-2
|Diameter||Body Diameter:93.4mm Height:98mm Thread Size: M18*1.5|
|Description||Lube oil filter|
|Mack For||Truck, tractor, trailer, excavator, car|
|Features||The oil filter helps remove contaminants from your car engine’s oil that can accumulate over time as the oil keeps your engine clean.|
|Medium Material||American HV filter paper/Customize|
|Paper Material||Imported from Korea, Germany etc.|
|Annual Productivity||36000pcs per year|
|2. neutral packing|
|3. MST packing|
|Delivery Time||15-25 days|
After the oil filter is used for a certain period of time, a lot of dirt will adhere to the filter element, so the filter should be replaced regularly. Generally speaking, the oil filter and the oil should be replaced at the same time. In this way, it is beneficial to extend the service life of the engine. For frequently used cars, the oil filter should be replaced every 7500 km. Under severe conditions, such as frequent driving on dusty roads, it should be replaced every 5000 km.
How oil filters work
The outside of the filter is a metal can with a sealing gasket that allows it to be tightly held against the engine’s mating surface. The base plate of the can holds the gasket and is perforated with holes around the area just inside the gasket. A central hole is threaded to mate with the oil filter assembly on the engine block. Inside the can is the filter material, most frequently made from synthetic fiber. The engine’s oil pump moves the oil directly to the filter, where it enters from the holes in the perimeter of the base plate. The dirty oil is passed (pushed under pressure) through the filter media and back through the central hole, where it re-enters the engine.
Choosing the right oil filter
Choosing the correct oil filter for your vehicle is of the utmost importance. Most oil filters look very similar, but small differences in the threads or gasket size can determine whether or not a particular filter will work on your vehicle. The best way to determine which oil filter you need is by consulting your owner’s manual or by referencing a parts catalog. Using the wrong filter can cause oil to leak out of the engine, or an ill-fitting filter could just fall off. Either of these situations could lead to serious engine damage.
Our product benefits:
High-efficiency, patented stacked disc media removes sludge to protect engine components and maximizeservice intervals
media for superior contaminant removal and cold flow ability, yielding longer engine life
The engine receives the super-cleaned oil from the stacked disc section straight to its components where it is needed most, rather than being sent back to the oil sump
Neutral packing.Carton inside,wooden case outside.Or custom-made according to the request.